Exo Products Guide

Setup Guide For All Exo Products [Have "Exo" in the title]

1. Disable Windows Defender

2. Turn off PC password/pin (IN CASE OF SPOOFER USAGE)

3. Disable anything else that protects your system

4. Enable Virtualization ( VT-X [INTEL] / AMD-V/SVM [AMD] ) in BIOS. - THIS STEP IS NOT REQUIRED IF YOUR ONLY USING EXO SPOOFER

5. Secure Boot disabled (required only for Intel CPUs).

6. Download ShareX or SteelSeries Sonar overlay then make sure they are enabled (AMD GPU). - THIS STEP IS NOT REQUIRED IF YOUR ONLY USING EXO SPOOFER

7. Enable SteelSeries or ShareX as admin and enable Sonar overlay - THIS STEP IS NOT REQUIRED IF YOUR ONLY USING EXO SPOOFER

8. Run the loader. Keep focus on the monitor that you need to have overlay on.

9. Enter your copied license key

10. We have in-built "Cleaner" and "Spoofer". Loader will ask if you need them every launch (obviously doesn't happen if you use Spoofer only and it will ask about "Cleaner" only).

11. Launch the game once CMD is closed and wait till software menu appear in game main menu (can take up to three minutes). Menu key: Insert.

---

Troubleshooting:

Failed to download files(1)

• Try again or update Windows.

---

No available servers were found

• Check the tool updates channel on our discord or website status page. (servers may be under maintenance)

• If they are up then try using a VPN

---

Virtual or RAID disk is present

• Turn off virtual disk or RAID in the BIOS and disable Intel Rapid Storage Technology (RST) if available.

• If this doesn't resolve the issue, find drivers/services that starts with "iaStor" by using Driver View or ProcessHacker to find them and disable the service.

• If all that didn't help, try reinstalling Windows.

---

Failed to allocate/map memory

• Make sure that you have 16 or more RAM in your PC.

• Disable everything in Task Manager -> Startup and then try again after PC restart.

• Make sure that loader located on PC and not on cloud space (e.g OneDrive, Mega.nz).

• Download AutoRuns and disable everything that related to Microsoft/Windows/CurrentVersion/Run. But DO NOT touch anything else.

---

Incorrect HWID

• Open CMD as administrator, enter these commands one by one: wmic diskdrive get Caption, SerialNumber wmic baseboard get SerialNumber getmac

• If any of those commands failed with an error then something is wrong with your PC, try to reinstall Windows and check if the problem is gone.

---

Failed to spoof hardware identifier(0x4)

• Reboot your PC and try again.

• If that doesn't help then something else already spoofing hardware identifiers.

• Find out whatever it is and disable it.

---

Loader crashing in 1-3 seconds after launch

• Download and install resources by clicking this text

---

Failed to load dependencies (1)(-5)

• Download and run the .reg file and then reboot your PC. After reboot try to use the product again.

---

Incompatible HWID

• HWID check error or HWID mismatch. Restart Windows and try again

• If didn't work, request HWID reset in our Discord server

---

Failed to load dependencies

• Turn off / delete anti-virus or FaceIT/Vanguard anti-cheat.

• Restart your PC and try to launch the product again.

---

Please enable AMD-V (SVM) in BIOS

• Enable AMD SVM in the BIOS [4th Step In Guide]

---

Please enable Intel VT-X in the BIOS

• Enable Intel VT-X in the BIOS. [4th Step In Guide]

---

Intel VT-x/VMX/SVM is not supported

• Run PowerShell as admin and use commands below: Set-ExecutionPolicy RemoteSigned

• After using the command above, restart your PC and download PowerShell file, open it as "txt" (double click on the ps1 file that you can download down below) file and then run PowerShell as admin and enter all commands one by one, once done restart your PC after copy-pasting all commands one by one: CLICK HERE

---

Error 0x302

• Restart your PC and try again.

---

SPACES disk is present

• Disable Microsoft Storage Spaces on Control Panel -> Storage Spaces.

• That might wipe all data on the disk.

---

Please disable Intel Rapid Storage Technology

• Read this troubleshooting step to disable RAID/IRST.

• If you have IRST/RAID disabled, you need to disable all drivers/services that start with "iaStor" by using DriverView or ProcessHacker to find them

• If RAID/Intel Rapid Storage disable already, please follow instructions on image below

---

Black Screen once in a while (Delta Force/ABI)

• Update your Windows to the absolute latest build.

---

Failed to delete hvax.exe(1)

• Delete "hvax64" manually by disabling SVM/VT-X/VT-D and deleting the file.

• After that SVM/VT-X/VT-D should be enabled back.

---

Failed to to init render

• Disable integrated graphics on BIOS.

---

Please unload a third-party hypervisor

• Restart your PC. If that didn't help, proceed to delete anything that using HyperVisor.

---

Please enable AHCI disk mode in BIOS

• Disable IDE/RAID mode or anything else that is not AHCI.

---

AES instruction set is not supported

Your CPU does not support AES instructions, or AES is disabled in the BIOS. Make sure that AES enabled in BIOS.