Temp TPM + HWID Spoofer Guide
Setup Guide For TPM + HWID Spoofer
Before you begin, make sure to manually disable your PC’s Bluetooth adapter through Device Manager or system settings. Important: Bluetooth must be completely disabled, not just toggled “off” in quick settings.
Note: If you've been TPM banned by past cheats it is strongly advised to do a full clean install of windows to remove any traces before spoofing! Read further for more information on how to do this!
IMPORTANT: HIGHLY RECOMMENDED TO USE A ETHERNET CABLE!
Step-by-Step Guide:
Disable your bluetooth driver, you can google how to do this!
Check Your Current Serials:
Use the provided Checker Tool to view your hardware serials.
Take a screenshot of the results and save it for reference.
Run the Spoofer as Administrator:
Right-click the spoofer application and select Run as Administrator.
Enter your key and you will be brought to next screen press.
Follow the Prompts:
If you are a new user press F2 to generate a new seed
From there on everytime you spoof you can use your existing seed unless you get banned
If you get banned on that seed you will need to generate a new one!
Verify the Results:
Once done, re-run the Checker Tool and take another screenshot of the updated serials.
Compare Before and After:
Check both screenshots to confirm that your serials have successfully changed.
IMPORTANT: If you are using a chair with this it's recommend to follow this order:
Inject your chair -> inject the spoofer -> start game
This is to prevent you from needing HWID resets everytime you change your spoofer seed!
Additional Notes:
The tool also spoofs your TPM for extra protection.
Tested and confirmed working on Warzone, BO6/BO7, and Fortnite.
Supports all Windows versions except 25H2 (support for 25H2 will be added soon).
If you continue to face bans after spoofing, a clean Windows reinstallation is strongly recommended before attempting again. Watch the video below to learn how to properly clean install windows. (Video says Windows 10 but it's basically same process for Windows 11 too.)
Note: Timestamp 4:34 is the most important part of clean installing windows! You must delete every disk partition for a actual clean install!
Troubleshooting:
If you encounter the error: "Your device ran into a problem and needs to restart" - Fix: Disable NX Mode in your BIOS settings.
System still crashes after disabling NX Mode - Fix: Only spoof ARP and TPM as some monitors may not be compatible with full spoofing.
Note: For some people turning off Virtualization fixes the bluescreens as-well.
BO7/WZ Ranked Update Bios Message Still Shows!
Fix:
Remove the CMOS battery from your motherboard.
Leave it out for approximately 1 minute to allow the system to fully de-static.
Reinsert the battery and clear CSM in the BIOS settings.
Another Fix:
Updating/Downgrading bios may get the same result
Note: This process should help reset the motherboard settings properly.
Follow these steps carefully to ensure proper spoofing and consistent results.
Last updated